2011 ITB Dodge Daytona weight

rcc85

rcc85

New member
Have I lost my mind? :shrug:
I could have sworn that there was a Technical Bulletin to reduce the ITB Dodge Daytona weight to 2380 lbs for 2011 but I can't find it. The updated on-line GCR (through the April Technical Bulletins) still lists it as 2630 lbs. so it appears that is the weight as of right now.

Was there a Technical Bulletin to change the weight for 2011 or was I dreaming? Josh? Jeff? Anybody?

Bob Clifton
ITB Dodge Daytona
 
I'll look into it. We voted to move it to ITC. I thought the interim solutino was since we missed the deadline for the class move, the idea was to allow it to run in ITB and the still lower ITC weight for 11, and then a move to C in 12. I will check, and sorry for the confusion.
 
http://www.scca.com/documents/Fastrack/11/11-fastrack-jan.pdf

CAR RECLASSIFICATIONS
IMPROVED TOURING
ITC
1. #3394 (Josh Sirota) Reevaluate weight/class of ITB Dodge Daytona
In 9.1.3, ITB, Dodge Daytona 2.2 (84-89), reclassify from ITB to ITC at 2380 lbs. and classify the identical Chrysler Laser,
effective 1/1/12. [Note separate Technical Bulletin item to reduce 2011 ITB weight to future ITC weight.]

After August FasTrack were CRB did not approve weight change
2. #1420 (Robert Clifton) Weight correction for ITB 84-89 Dodge Daytona
This car classification is older than 5 years. Changing the weight would not be in accord with 9.1.3.C next to last paragraph.
However, the ITAC plans to consider a rule change proposal to address modifications of older IT classifications.
 
Last edited:
That same document, pg 29.

"ITB
1. #3393 (CRB) Reduce weight of ‘83-’84 Dodge Shelby Charger
In 9.1.3, ITB, Dodge Shelby Charger (83-84) and Dodge Omni GLH 2.2, change weight from 2340 to 2290. [An error was
made during the initial weight-assignment process.]"

almskidd said:
http://www.scca.com/documents/Fastrack/11/11-fastrack-jan.pdf

[Note separate Technical Bulletin item to reduce 2011 ITB weight to future ITC weight.]

That's the part I can't find, the separate Technical Bulletin item.

Bob Clifton
ITB Dodge Daytona
Click to expand...
 
No, Chris, that's the weight correction on the Shelby Charger and GLH, not the Daytona.

Bob Clifton
ITB Dodge Daytona
 
rcc85 said:
No, Chris, that's the weight correction on the Shelby Charger and GLH, not the Daytona.

Bob Clifton
ITB Dodge Daytona
Click to expand...

Question: Does he Daytona and the GLH/Charger use the same 2.2 liter motor?

Edit. looked at GCR and they have different compression ratios. I am guessing other things are different too.
 
Last edited:
almskidd:

Not quite the same motor (different vin code), although a lot of the parts are the same. The Shelby Charger & GLH have higher compression because they use a shorter deck block (which also changes the cam timing even though the cams are the same) than the Daytona. The Daytona is also fuel injected and the Shelby Charger & GLH are carburetted. Stock HP for the Shelby Charger & the GLH is 110 while 99 was the best for the Daytona.

Also, the cars are based on a different platform: Chargers and Omnis (GLH) are 'L' bodies while the Daytona is a 'G' body.

Bob Clifton
ITB Dodge Daytona
 
Yes, and in my opinion you will see a lot more of that in the future. Why?

1. There just aren't any more 70 hp cars out there any more.

2. Car curb weights are going up. That means acheivable race weights are too.

3. The Process uses hp/weight as its base. So, you will see a lot of heavier ITC cars with more stock hp but also more weight -- and thus same power to weight.

I think it is good for the class, and healthy, and may be the only thing that keeps ITC viable in the future.

evanwebb said:
So the idea is to add a 100 HP stock car to ITC? Hmm...
Click to expand...
 
rcc85 said:
Have I lost my mind? :shrug:
I could have sworn that there was a Technical Bulletin to reduce the ITB Dodge Daytona weight to 2380 lbs for 2011 but I can't find it. The updated on-line GCR (through the April Technical Bulletins) still lists it as 2630 lbs. so it appears that is the weight as of right now.

Was there a Technical Bulletin to change the weight for 2011 or was I dreaming? Josh? Jeff? Anybody?

Bob Clifton
ITB Dodge Daytona
Click to expand...

Bob,

Just confirmed, there was a clerical error during Fastrack prep. The mention of the TB was there but the TB itself got left out. It'll get taken care of in the next Fastrack. Sorry about that.
 
JoshS said:
Bob,

Just confirmed, there was a clerical error during Fastrack prep. The mention of the TB was there but the TB itself got left out. It'll get taken care of in the next Fastrack. Sorry about that.
Click to expand...

And I bet the master tech bulletin is written from that, I looked there too :/
 
Russ Myers said:
So can we move the Pinto into ITC. Afterall, it used to race against Rabbits and Fiestas in it's SS days.

Russ
Click to expand...

I sold my Pinto so I don’t follow this forum much anymore… but, if this is the new way of doing things, the Pinto definitely looks like an ITC car.
92hp x 1.25 x 17(itb) +50(front suspension)= 2005lbs
2005lbs will never happen, I don’t think I ever made it in to the 2300’s

92hp x 1.25 x 18.84(itc) +50(front suspension)+50(displacement)= 2270lbs
Still low but might be do-able with some work and $$$

I could finally have the RWD ITC car I always wanted!

Assuming my math is right, that would be a pretty fast ITC car??? doesn’t make sense…
:shrug:
 
You must log in or register to reply here.
Back
Top