240Z Air dam

Not being a S-A, but the bottom half looks just like my Home Depot air dam that I made for my Neon.
Garden edgeing with alum. strip.
Carlos
 
I couldn't find this air dam on MSA's website. Is this a piece that they sold in the past but is no longer available?
 
It looks strangely familiar to me. IT almost looks like they took the spolier type I have and cut away a lot of it and used it.
attachment.php


Almost like they cut the top part off all the way around, and most of the bottom part too.

Those sides on the red car look like the profile from mine on the side.

attachment.php
 
Like Ron said, it looks like a Xenon that has been cut. The brake ducts are in the right places and it looks like the the bottom edge was added.

If we are right it is a Urethane Xenon. They are all over the web and ebay.
 
Last edited:
I'll try and get better pictures of the spoiler underlip area where it really looks like the picture you have. Mine is hacked up with additional ducts but that profile looks like mine. I dropped the car at Rex's for rear main seal replacement while we look at Jeff's motor. We can't have but one car in at a time and I hate the tranny job on jack stands, gives me the willies thinking about getting crushed.
 
Ya' know it may not be a Xenon. Mine is as I found the manufacturing logo on the center inside of the dam. BUT, the dam extends all the way up to replace the OEM valance entirely and leaves the turn signal are open. It looks like the one Steve is asking about still has the OEM valance pan.
 
Definately not a Zenon... That's what I have on my car. The one in the picture attaches to the bottom of the stock vallance, like Paul said. Not a BRE either. The BRE extends forward. The search continues.....
 
Come on guys... I know SOMEONE knows the source of this air dam! I snapped this photo at Firebird raceway in Phoenix in March of 06. The car is the 46 red Z car. Anybody?
 
You must log in or register to reply here.
Back
Top