2nd Gen. brake rotor thickness

bldn10

bldn10

New member
Excuse all these quations but I am going through my car for next season and I hope most of this will be useful to all of us.

At what thickness do you replace the rotors? I gather that the minimum is 20mm for the fronts but what is the original thickness? Mine appear to be at about 21mm and that sounds like time for new ones if they started at 25 but not if at 22.

------------------
Bill Denton
87/89 ITS RX-7
02 Audi TT225QC
95 Tahoe
Memphis
 
bill
it might be overkill, but i replace rotors every time i replace pads. i am a maintainence freak because i also change all fluids after every weekend. seems to keep the car pretty reliable.
john costello
its rx7 #87
NePA region
 
Thanks guys; since mine are only half worn (22-1=21) and otherwise in decent shape, I'll get another season out of them. Where's the cheapest place for Hawk blues?

------------------
Bill Denton
87/89 ITS RX-7
02 Audi TT225QC
95 Tahoe
Memphis
 
Bill,
I found them on MAZDAMOTORSPORTS.COM The front set of Hawk blues were $ 125.05 and the rear set for $ 77.70.

Michael Flock
ITS 1988 RX-7
CEN-DEV

[This message has been edited by ITS51RX7 (edited January 06, 2005).]
 
Originally posted by ITS51RX7:
Bill,
I found them on MAZDAMOTORSPORTS.COM The front set of Hawk blues were $ 125.05 and the rear set for $ 77.70.

Michael Flock
ITS 1998 RX-7
CEN-DEV
Click to expand...
Michael, either you need to check your sig or I need to check my GCR.
smile.gif


BTW, where are you located? Plan to come to Michigan?

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR

[This message has been edited by Eagle7 (edited January 06, 2005).]
 
A forum sponsor (at the top of this forum) Raceshopper.com is where I get mine at $121 for blues in the front. I think they are currently giving free shipping if you buy fronts and rears.

------------------
Jamie Kekeisen
86 ITS RX-7 NER
92 325IS under construction
 
You must log in or register to reply here.
Back
Top