prodogdriver
New member
I am planing to purchase a '94 325is from a local junkyard, I plan to prep the car for ITS. Are there any favorite places to buy used sheet metal(body parts)? I wil also need the standard performance parts.
325is for ITS
- Thread starter prodogdriver
- Start date
mlytle
New member
for internet or mail order, my favorite place is bimmerssouth. big bmw recycling operation in georgia. rust free parts, nice people, great service.
http://www.bimmerssouth.com/
marshall
e30 its
http://www.bimmerssouth.com/
marshall
e30 its
prodogdriver
New member
Their on-line catalog lists 95% of the parts I need! thanks
Bimmersouth is a good group of people. Vines is another one to contact. Strictly German is OK for parts but clueless when it comes to race prep and race car stuff no matter what they tell you. You NEED to contact Bimmerworld if you want to be a contender in an E36.
Where are you anyway?
Robbie
#10 ITS E36 Atlanta
prodogdriver
New member
No need to worry about me for competition, I'm in CENDIV. (Indiana) I might run some Midwest Council also. I plan to only run a few races a year. I don't see myself at the ARRC at any point. A guy I work with runs BMW club events with his M3, he also recommends Bimmerworld, thx.
Z
zracer22
Guest
Ground Control for suspension components.
prodogdriver
New member
His name is Wayne Leuthold, he runs an M3 lightweight in the BMW club prepared class.
eh_tony!!!
New member
Quick note to anyone needing body parts.. A friend of mine owns a performace garage/body shop and mentioned how cheap non BMW replacement body parts were... Somehting like $75 or so for a 5 series front fender.. Said the 3's were similar.. $75 may not be right, but it is prolly less. I do remember being quite shocked at how reasonable they were.
prodogdriver
New member
Yes, I also work at Tirerack. I take possession of the 325 next week. I feel that I have made a good car choice. Also this site has proven to be an invaluable resource, thank you everybody.
Personally, I wouldn't run your BMW in Midwest Council. It won't last.
They don't seem to care about contact (at least at the last Road America event), and don't have a rule allowing protests for intentional driver contact/aggressive driving. One of their BMW drivers is known for intentionally hitting his competition (even within BMW CR).
They don't seem to care about contact (at least at the last Road America event), and don't have a rule allowing protests for intentional driver contact/aggressive driving. One of their BMW drivers is known for intentionally hitting his competition (even within BMW CR).
prodogdriver
New member
Thanks for the heads up. I also heard about that council race from other people. In fact there was an on-line video clearly showing a Mustang causing a 4 car pile up in turn one at the start! And I was told that an E36 went backwards into the wall resulting in heavy damage to his car.
The BMW was struck twice by another E36. First at the exit to turn 6, and then again when the following car drove right into the lead car (never lifted). People who were watching the race (including corner workers) said the following driver couldn't have made the corner without hitting the lead car (e.g.; it wasn't the leader's fault).
prodogdriver
New member
Mike, send me an email, [email protected]
Mike what's your last name? I used to do I Stock in BMW CR. I'm also curious who this bang 'em up guy is too.
Robbie [email protected]
#10 ITS BMW Sediv
FYI, he was DQ'd by the stewards for rough driving after the race.
I have run Council for a long time and have found the contact to be minimal. There are always individual exceptions in any group.
I usually lurk, but felt I should speak up. Council should not be condemend due to the actions of one guy.
Mark
ITB 3201