89 Escort Scanner Port

R

ric3rd

New member
I just got an 89 Escort GT and want to check for scanner codes. Where is the connection port? Also where is the ECU box located and what sources are available for remapping.

Thanks,
Rick
 
The port is near the passenger strut tower.

Diane

Originally posted by ric3rd:
I just got an 89 Escort GT and want to check for scanner codes. Where is the connection port? Also where is the ECU box located and what sources are available for remapping.

Thanks,
Rick
Click to expand...
 
I found the port and checked for codes...none present. But where is the EEC-IV box located? I'm already done stripping out the interior except for the dash, so I'm assuming it must be under the dash.


Originally posted by Diane:
The port is near the passenger strut tower.

Diane
Click to expand...
 
Should be under the dash (rather, attached to firewall--inside) on the driver's side.

About a 40 pin socket plugs into the box (about6X8X2inches).

Good luck.
 
I have a 90 GT. Mines is located behind the dash left of the steering column. Sort of behind the headlight switch.

What kind of codes are you looking for? Also....how would you go about remapping to gain any performance? I ask out of my own ignorance.

------------------
Doug
ITB Escort
[email protected]
 
Originally posted by Racescort:
I have a 90 GT. Mines is located behind the dash left of the steering column. Sort of behind the headlight switch.

What kind of codes are you looking for? Also....how would you go about remapping to gain any performance? I ask out of my own ignorance.
Doug I've fought the reprogram thing to death and nobody makes a chip for it and nobody reprograms it. It also has a 7000 rpm limiter that i cant get rid of. if u find out how let me know. Stroube
Click to expand...
 
Nope--Not into EFI and ECU(s); my cars are carburetted.

I will say that your motor cannot safely turn anything over 6500rpm on a consistent, continuous basis since it has hydraulic lifters (supposed to anyway)and an under-square bore/stroke relationship.

The 1.6 will turn more, but it is also limited by the lifters.

You are also not making power at those hi revs.
 
Originally posted by joeg:


You are also not making power at those hi revs.
Click to expand...


Most certainly not!
frown.gif


But I'm still trying to figure the back side of Lime Rock out. It's either wind the car way out and hit 4th after the uphill, take 4th on No Name and hold it (which loses me about 3mph on the uphill), or take 4th on No Name and back to 3rd as a brake for the bottom of the uphill.

Maybe once I get a little more confidence I will find I don't need to "brake" as much for that last turn and 4th will be fine.
confused.gif


Diane
<still learning!>
smile.gif
 
You must log in or register to reply here.
Back
Top