I was going thorugh and organizing some boxes of Spares, and found a stack of Restrictor Plates. They are from an M50 2.5L I6.
There are 6 Plates in total, Sizes include:
2-1/4
2-9/32
2-5/16
2-11/3
2-3/8
2-3/16*
*Note this is a thicker aluminum plate, as the others are all the same thickness (small, about half the thickness of the aluminum plate).
These are the measurements I took, and I'm pretty sure they were made to Metric, so they'll have to be measured with a metric Caliper (i only have standard here).
If anyone wants the entire set, let me know, and we'll work out a deal.
Thanks!
There are 6 Plates in total, Sizes include:
2-1/4
2-9/32
2-5/16
2-11/3
2-3/8
2-3/16*
*Note this is a thicker aluminum plate, as the others are all the same thickness (small, about half the thickness of the aluminum plate).
These are the measurements I took, and I'm pretty sure they were made to Metric, so they'll have to be measured with a metric Caliper (i only have standard here).
If anyone wants the entire set, let me know, and we'll work out a deal.
Thanks!