Carrera Camber Plate Studs

P

planet6racing

New member
OK, I need some help finding something. I was setting the camber for my upcoming first race (I know, it's August and I haven't hit the track yet!), and I snapped one of the studs on my camber plates up front. So, I'm looking to replace all the studs.

Well, unfortunately this isn't a normal stud. It's a captive stud, similar to part number 93580A325 at McMaster-Carr. It is an M10X1.50 threaded stud.

Any idea where I can find 10 of these? If one broke, I'm replacing them all. I'd prefer a Grade 5 stud, but I'll take whatever can be found.

Thanks!

------------------
Bill
Planet 6 Racing
bill (at) planet6racing (dot) com
 
Bill, Carrera IIRC is now called Q1. I was on their site several months ago. Do a search for Carrera & or Q1. They are in Minnesota & will have what you need. Should be one day two at most.

Have Fun
wink.gif

David
 
Oh, believe me, I've googled. There is one hope (besides Carerra) that I've e-mailed, but I don't want this to keep me off track...

James, the stud that you show is a leveling stud. I don't think it will hold up to what I need.


------------------
Bill
Planet 6 Racing
bill (at) planet6racing (dot) com
 
Can you open up the hole to accept a larger stud? If so, you could then use an off-the-shelf wheel stud from ARP... like an 7/16" or M12X1.50

I've got a boatload of OEM M12X1.50's leftover that you can have since I've replaced my stock wheel studs with longer ARP studs to allow me to fit my wheel spacers.
 
These studs have a small spline, probably 12 little tangs if you will, that engaage the base metal.

I've thought of replacing them with wheel studs and it may come down to that. But, the part that goes over the stud would also have to be made larger and, while I haven't done the calculations yet, I'm not certain it will survive.

Oh, and I guess I should have described the part better. It's the Carrera Camber Plates listed in Pegasus' catalog.

------------------
Bill
Planet 6 Racing
bill (at) planet6racing (dot) com
 
Carrera equals QA1motorsports equals www.qa-one.com order number 1-800-721-7761

There catlog will not download thru my present deal.

Tell me why you don't call them for your studs ?

Havee Fun
wink.gif

David
 
Well, probably because I was at the doctor's office today and didn't have the energy to call them.

------------------
Bill
Planet 6 Racing
bill (at) planet6racing (dot) com
 
Big surprise here: QA-1 has discontinued that line and does not have any of the parts.

However, there is another fastener company that seems like they can help me, so if they have inventory, I should have parts!

------------------
Bill
Planet 6 Racing
bill (at) planet6racing (dot) com
 
***QA-1 has discontinued that line***

Interesting: Pegasus & ISC Racing must be selling their stock & that's it.

Have Fun
wink.gif

David

[This message has been edited by ddewhurst (edited August 01, 2005).]
 
You must log in or register to reply here.
Back
Top