Coilover Preferences

B

backformore

New member
Did a search but no joy. What are people's preferences or what are you using for coilover sleeves on your Hondas? Planning on Koni shocks.

Looks like the two obvious choices are GC or Koni sleeves. Opinions?

Thanks
Rory

PS It's for a 2000 Si.
 
backformore said:
Did a search but no joy. What are people's preferences or what are you using for coilover sleeves on your Hondas? Planning on Koni shocks.

Looks like the two obvious choices are GC or Koni sleeves. Opinions?

Thanks
Rory

PS It's for a 2000 Si.
Click to expand...

Save a mint and just get a full ebay set for $30. Throw out the springs and get some Eibachs. Easy peasy. I've put them on a 4 different cars now. (I've even used the springs on several of the cars, but watch out - most are like 800lb/in!)
 
I have used Koni sleeves (with Koni dampers) on my 90/92 Integra for 10 years with no issues [except the plastic Teflone ring that the spring sits on broke after 5 years, Koni shipped me replacement plastic rings]

Victor
ITA
 
Posted in your other thread about this.

I bought piece parts; Sleeves and Koni adapters from Skunk2. I already had Eibach springs though and only needed two coil overs.
 
Both are good choices... the GC is typically a 2.5" spring versus the Koni with 2.25's. Obviously one is lighter than the other and the 2.5's seem a little easier to find used.

Christian
 
You must log in or register to reply here.
Back
Top