Engine mounts

  • Thread starter Thread starter zracer22
  • Start date Start date
Z

zracer22

Guest
Last year a used stock engine mounts on my E30 325is. They worked just fine until I hit the apex of the Kink at Nelsons. The engine moved so far that the power steering pully cut the lower radiator hose. Does anyone know of a vendor that sells all metal mounts?
 
Get two new E30 mounts, cut off the studs, and drill completely through the mount. Get a nice long grade 8 or better bolt the same length as the mount and studs. Install the assembly and use a self locking nut. This meets the letter of the rules, i.e. it is not a solid mount. This will save you untold amounts of money and grief.

530i (E12) mounts will also work, but they will have to be changed at least once a year. They are a bit more robust than the standard E30 mounts.
 
Originally posted by Bruce Shafer:
This meets the letter of the rules, i.e. it is not a solid mount.
Click to expand...

Please correct me if I'm wrong, but I don't recall the ITCS allowing different motor mounts. The fact that they are not solid doesn't matter, they're still not stock. If the rules don't specifically say you can, then you can't.

Grafton
 
bruce, in a semi-related vein, do you have good part numbers for the motor mounts..my supplier (wholesale) indicates the numbers on the cd are euro numbers. also, the cd lists a cup to stablize the motor mount-know anything about these..thanks,

------------------
Chuck Baader
SEDIV ITS #36
E30 BMW
 
You must log in or register to reply here.
Back
Top