Injectors, what to do?

[Richy Gonzalez]

I'm in the process of rebuilding the head of my 89 CRX and was wondering what to do with the injectors. Not that I had fuel problems but should I have the injectors tested?, cleaned?, blueprinted?, gold plating?

Thanks!

------------------
Richy Gonzalez
#21 ITA CRX

[This message has been edited by Richy Gonzalez (edited May 29, 2002).]

 

[Chris Sawatsky]

send them off to RC to have them cleaned and balanced. $20 per injector, I think?

 

[racer-025]

Historically, Honda makes very good injectors that don't require much maintainence. We have had several injectors tested & cleaned, and the worst one had only 2% less performance.

 

[Richy Gonzalez]

Thanks for the info.

------------------
Richy Gonzalez
#21 ITA CRX

 

[danielbeeson]

Who is RC?

Sorry if this is a dumb question?

Dan Beeson
www.beesondesigns.com/beta

 

[racer-025]

RC Engineering (Russ Collins)
http://www.rceng.com/

 

[spsspeed]

I recently had my injectors sent to Marren Motorsports and one of them was out by 4%.
That is from a 1995 Integra.

So I would have them sent out, cleaned, flow-matched and they will replace all the seals on the injector also. Cost was $100.

Scott Seck
ITS Integra GSR

 

[Richy Gonzalez]

Scott,
Thanks for the info. I was thinking of sending them to RC but I'll go ahead then send them to Marren Motorsports www.injector.com .

------------------
Richy Gonzalez
#21 ITA CRX

 

[Richy Gonzalez]

FYI - Just got my injectors back from Marren Motorsports and come to find out, I had 5.4% lost and 2 out of the 4 injectors had a bad spray pattern.

------------------
Richy Gonzalez
#21 ITA CRX

 

[Jon Nelson]

Any noticable difference in the way it runs after?

J

 

[Richy Gonzalez]

J,
The head is off the motor at the machine shop and I won't be running the car until August (hopefully). We'll see how the car feels then.

------------------
Richy Gonzalez
#21 ITA CRX