Instrument Cluster removal

D

Duc

New member
Have a new toy to put in place (IQ3), and was wondering if it is legal to fully remove the instrument cluster. I could not find anything that says otherwise. Right now until I get everything instrumented it is staying in front.
 
c. Gauges and instruments may be added, replaced, or removed. They may be installed in the original instrument(s) location using a mounting plate(s), or any other location using a secure method of attachment. Other than modifications made to mount instruments and provide for roll cage installation, the remainder of the dash “board” or panel shall remain intact.
 
dickita15 said:
c. Gauges and instruments may be added, replaced, or removed. They may be installed in the original instrument(s) location using a mounting plate(s), or any other location using a secure method of attachment. Other than modifications made to mount instruments and provide for roll cage installation, the remainder of the dash “board” or panel shall remain intact.
Click to expand...

Have read that, should have asked to get further clarification. The instrument cluster (which includes switches, which based on a previous thread switches cannot be removed) is considered an gauge and/or instrument?

Thanks,

Derek
 
Hmm that is interesting. Odo reset I say is part of the instrument just like when I removed my speedometer I also removed the cable as part of it. The fact that it is also how you access the info system illustrates the problem we are going to have keeping race cars simple as auto technology gets more complex.
 
You must log in or register to reply here.
Back
Top