Koni Rebuilds

RSTPerformance

RSTPerformance

New member
I need to know who/ where I can get Koni Struts rebuilt. I need them done in 1 week so I have them in time to put in for the NARRC Runnoffs. Does anyone have any good suggestions? I am willing to pay for 1 day shipping if necassary. Please don't be afraid of plugs for yourself by the time the moderators lock the thread I'll have your number
smile.gif
so feel free to give me any info you may have!

Thanks
Stephen
ITB Audi Coupe
NER SCCA
RSTPerformance.com
Concord NH
603-228-1254
 
Stephen,

I am betting it will be real hard to do this in a week. We use Truechoice or Ground Control.

I would get some new ones made/shipped and yhen do a deal on the cores when you send them back. It may be the only way.

AB

------------------
Andy Bettencourt
ITS RX-7 & Spec Miata 1.6 (ITA project)
New England Region R188967
www.flatout-motorsports.com
 
I was lucky my JH came with Konis, which are now basically Unobtainium nowadays.

I sent them to TrueChoice for rebuild but it wasn't cheap nor fast. $95 per shock and about a 3 week wait. Also they DID NOT replace any bushings or hats on the shocks - quite poor in my opinion - to leave the old stuff in place. I'll be looking for another place to have my fronts done.

------------------
Ron
http://www.gt40s.com
Lotus Turbo Esprit
BMW E36 M3
RF GT40 Replica
Jensen-Healey: IT prep progressing!

[This message has been edited by rlearp (edited September 16, 2004).]
 
Lee, crxLee on the honda-tech road race forum, works for Koni, he is very motorsports oriented. Look him up and maybe he could hook you up with some quick service. I know everyone on that board who has dealt with him praises his work
 
Thanks Guys!

I am going to bring them to Ohio with me tomorrow and see if the Koni Trailer will be able to take a look at them during the week. Hopefully they will be able to fix them out there. we shall see. If not It looks like we woill be running them the way they are at the NARRC. I'd rather run them blown then not run at all
smile.gif


Stephen
 
Stephen,

Try Bruce's Speed Shop in NJ (Rt 46 in Rockaway, IIRC). I know he's an authorized Bilstein rebuilder, and I believe he also does Afco, Carrera, and possibly Koni. I have no idea how long it would take to turn them around, but I suspect anything can be done for the right price.

------------------
MARRS #25 ITB Rabbit GTI (sold) | MARRS #25 HProd Rabbit
SCCA 279608
 
You must log in or register to reply here.
Back
Top