Koni Shocks

ITS51RX7

ITS51RX7

New member
Hello,
I have a question about the Koni Sports shocks and struts that are currently on my car( 2nd Gen rx7). They are wore out and was wondering if I should have them rebuilt or just discard them and install new.
If I should send them out for a rebuild who have you had good luck with rebuilding Koni shocks.
Thanks,
Michael Flock
 
They are rebuildable, but it's probably at least as cheap to buy new. Koni quoted me $140 + parts & shipping, TrueChoice quoted $135 + parts & shipping.

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR
 
I seem to be having some trouble and was hoping for any ideas.
I removed the fronts struts from the car and then removed the top cap which holds the Koni strut inside the steel tube all of the contents of the strut came out except the outside metal wall of the strut seems to be stuck inside the tube.
Any ideas on removal. ??
Thanks,
Michael Flock
 
I assume you've got the 8641-1200 inserts. They are supposed to be held in the strut housing with a bolt through the bottom. If you loosen the bolt but don't fully remove it you can press on the bolt to force the insert out. I've got a press, so it worked pretty well for me. I expect you could tap with a hammer and get it moving.

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR
 
My strut inserts are mounted in a modified original strut - the top is cut off.
Sorry, don't know how yours works. Maybe you should call AWR?

------------------
Marty Doane
ITS RX-7 #13
CenDiv WMR
 
You must log in or register to reply here.
Back
Top