Lifter clacking

T

timo944

New member
This is a long shot but does anybody have experience with a lifter making a racket? The leak down checks out fine. I changed all the lifters and pulled the head and had it checked... twice! Nothing appears to be wrong. The camshaft is perfect, lifters all feel OK, the valve stem heights are all in spec. I even swapped cam shaft housings. Yet, there is one lifter, somewhere in the middile of the motor, clacking away.

I went to the dyno shop (for a different issue) and ran the car, and after 3 runs there is still some lifter noise. The guys at the dyno shop commented on it so it's not my over-sensitive ear. It's really noisy at start-up and gets better as the motor warms up.

Any ideas most welcome. I've bailed on 3 races this year already - I want to resolve this first.

TIA
Tim
 
Oil pressure is great. Feel test is hard to do, It's hard to get the two lifters that are soft coming out of the motor (because they are depressing a valve) to pump up.

I'm a little worried about running it with the current situation. A few weeks ago (after swapping lifters) I had an occasion when it sounded as if a piston hit a valve a few times. This was when the engine was still cold and I cracked the throttle open a hair. After idling for 5 mins and warming up this didn;t happen again. So my belief is that there is a stickly valve. However, as I said before, leak down is OK and the machine shop checked head and claims that every valve is good, no indication of a strike, etc.

So I'm :blink:. What to do next?

At least I'm providing good business for the gasket makers.
 
Is this a new rebuild?

The story goes that Zinc was removed from oil and this said zinc is needed in the critical break-in period

I read in grassroots motor sports how David Vazird cured a problem on a GM truck that had lifter clatter using Royal Purple oil

On cam and lifter changes proper break-in is essential
Now more than ever since they removed the zinc

http://royalpurple.com/breakin-oil.html

HTH
David
 
David,

Appreciate the thought. Yes it's a new motor, though this issue didn't appear until race # 3. I used Joe Gibbs break in oil at start-up and for dyno testing and am now using the Valvoline "racing" 20W50 that is supposed to be high in zinc and other critical materials. I debated trying a different oil but have done so yet...

Tim
 
FWIW, I've been nothing but very happy with the VR1 oil myself - though admittedly in the Audi motor! ;)
 
924Guy said:
FWIW, I've been nothing but very happy with the VR1 oil myself - though admittedly in the Audi motor! ;)
Click to expand...

Don't you mean Volswagen? He he - sorry that was a cheap shot.

So, in desperation I decided to fix up the old Nissan to race this fall while I figure out what to do with the 944. I need to get it fixed up to sell it anyway. Spent all weekend replacing broken suspension bits and the oil pan gasket. Started her up yesterday and guess what? You got it, a bad lifter! :blink:
 
So i took the head somewhere else. Apparently it's "all screwed up" - the vaves seats were machined crooked. This could easily account for a valve sticking I suppose.
 
You must log in or register to reply here.
Back
Top