Log Book Inspection

R

raffaelli

Member
Hey Fellas, Can you give me some direction on obtaining a log book? I have reached out to a few people in Region 23 (where I am) to get some advice. I droppped a few notes to te NYR stadd but have not heard back yet. I would like to get the log book accuired as soon as I can. Am I limited to NYR? Can you put me in contact with someone who can issue log books?
 
You are not limited to your region. If you are willing to tow it some distance, find the chief of tech for a nearby region.

Cheers.
 
Some regions will have annual tech days prior to the start of the season. Find out who your chief of tech is and get in touch with him directly, he should be able to let you know. Some of them will actually come to your home to do the inspection, but more likely you'll have to take the car to a garage or the track, depending on what they have scheduled.
 
Mo-Hud usually has a spring tech day that I understand is a pretty good party in the Albany area, usually in March I think. Most Tech inspectors will do a car that you bring to them as will I, but I am a couple hours away.
 
I have been in contact with Richard. He is willing to see my when the weather 'does not suck'. I have been told that NYR has not had a tech session in a few years.



Dick, if things don't work out with Richard for me, I may give you a call. You are about 2.5 hours away.





Thanks for the information guys. Merry Christmas.
 
Hey Chris,

Merry Christmas to you and your family!

If I remember correctly, you're getting ready for the school at SP in March. The Mo-Hud annual tech day in the past has taken place in April and I expect the same this year. So in my opinion, here are your options:

Try to hook up with a tech like Richard (very difficult!!) or Dick.

Find a region that holds an annual tech day prior to the SP school. I believe NER has held it in recent years iin Manchester, CT at around mid-March. The NNJ region has it at about the same time.

Have it done at SP prior to the school. The WDC folks are generally very accommodating. Even if your car is not 100% up to snuff, but it does not have any major safety deficiencies, they most likely let you run it at the school.

I have built two cars that have sailed through tech and I'm fairly familiar of what's required. I could swing by your house one weekend to have a look at your car if you'd like.

Anthony
 
.... my experiences with tech recently has been not only fine, but above fine...to the point of beyond expectations by a mile.
 
NNJ is in the early process of scheduling its 2008 tech days. The early schedule looks like: the first day will be in late March (30th?) somewhere in Northern Jersey (Denville, NJ?); a tech day in Montgomery, NY (with the NEDIV HRG folks) on April 26th; and the last day on April 27th (Oxford, NJ?). In addition, I am also looking at a tech day in South Jersey (Williamstown, NJ?) on April 12th. These dates of course could change.

I am in central New Jersey, about 2 - 2.5 hours from you. NNJ does have a few techs in the northern part of New Jersey that could possibly meet up with you.

(609) 406-9763 (H)
 
NNJ was great to me as well - somebody (can't find his name) came out to my house to inspect and issue a book on the car last fall for nothing more than a cup of coffee.
 
Thanks for all the input. I certainly have a few options now.



I need to tie up a couple of things on the car first. I think tow straps and wiring the kill switch are all that is left.
 
I need to tie up a couple of things on the car first. I think tow straps and wiring the kill switch are all that is left.

[/b]
Click to expand...

A quick checklist for you (others can fill in what I missed) of stuff I can think of:

- Cage

- Belts

- Pull down window net

- Seat

- Seat back brace (if needed)

- Cutoff switch

- Fuel test port

- Tow hooks

- Solid battery tie down

- Fire extinguisher (system)

- Exhaust properly routed

- Stickers (SCCA Club Racing, Class, E! Shut off, Extinguisher and H&N if you run one)

- Pictures (Front and rear 3/4 views for the inside cover of your logbook - 3X5's will do)

- Steering column lock disabled
 
?????? [/b]
Click to expand...

This may be regional but this past year we were required to run a 'HANS' sticker (if you had one) by the driver window opening to signal to workers that they will need to be prepared for those products during extraction. Tough to see in this picture but the RX-7 of Steve Ulfelder has one above the T in Flatout and the E36 of Dave Maynard has one above his name on the rear glass. My car now has an 'R3' in a similar spot.

CheapDate07101.jpg
 
If you are interested in retaining the operation of the ignition key to start the vehicle, you must remove the ignition housing by loosening the screws with a chisle. Insert the key and turn to the ACC position. Then push in the small set pin which will allow the ignition cylinder to slide out of the housing. "DO NOT TURN THE KEY WHEN THE CYLINDER IS REMOVED!" Remove the metal end cap and remove the steering locking pin. Reinstall housing with normal bolts.
 
IMO, the "steering lock" rule is an anachronism, sorta like the old "blood type on helmet/suit" thing.

Ever heard of one failing ?

With millions of vehicles out there with steering locks, you'd think that any problem with them over the last 30+ years would have brought the product liability lawyers howling and running, like beagles on a rabbit.

Silence.

Just another weird rule from SCCA's past, based on suspicions but not facts.
 
This may be regional but this past year we were required to run a 'HANS' sticker (if you had one) by the driver window opening to signal to workers that they will need to be prepared for those products during extraction. Tough to see in this picture but the RX-7 of Steve Ulfelder has one above the T in Flatout and the E36 of Dave Maynard has one above his name on the rear glass. My car now has an 'R3' in a similar spot.

CheapDate07101.jpg

[/b]
Click to expand...


Last year while the grid workers were doing their final walk through, they noticed me hooking up my Isaac (Link). They had never seen one and wanted me to come by at lunch and do a demo. they were thinking more in the line of learning it to help get drivers hooked up, but I would think ALL flaggers, grid, pit workers should have some knowledge of the different systems..... If I was in a bad situation, I would want the first worker there knowing what kind of system I wear. When they get to my burning car, I want them to have his/her knife ready to cut off the Isaac. No screwing around trying to figure out what system I have.

But I'm in the same region as Andy and had not heard that about the decals (although I do have one just for the reason I stated above).


As far as the steering locks go, I assumed it was for easier towing and such, not for the potential of failure.
 
This may be regional but this past year we were required to run a 'HANS' sticker...[/b]
Click to expand...
But I'm in the same region as Andy and had not heard that about the decals...[/b]
Click to expand...
It was requested by our chief of tech, but not required by regulation (i.e., GCR and/or supps). - GA
 
You must log in or register to reply here.
Back
Top