Mazda Rx 7 freeze plug issues

B

BruceG

New member
Help!

Has anyone ever blown a freeze plug on a 12a engine? does anyone know the normal location of the plugs and will they blow if there isn't enough antifreeze in the radiator?

I had a rx7 w/ a 12a shipped from California and it was shipped with water and water wetter in the radiator!!

When I put antofreeze in the radiator now(should have tried water first, I guess) it leaks out on to the floor just behind the front axle(center of the case). Is there a freeze plug(s) there? It looks like at the lowest part of the case before the transmision.

Thanks,

Bruce:shrug:
 
I am no 12A expert Bruce but on the 13B there is a drain plug on the center housing drivers side. Any freeze plugs are in the rear cast iron behind the flywheel or under the front cover for the oil pump. Best of luck.
 
Hi Steve

Thanks for the info on the plugs. I'll let you know more once I have the car up on a lift.

Bruce
 
seckerich said:
I am no 12A expert Bruce but on the 13B there is a drain plug on the center housing drivers side. Any freeze plugs are in the rear cast iron behind the flywheel or under the front cover for the oil pump. Best of luck.
Click to expand...

The 12A also has a coolant drain on the driver's side at the bottom of the center housing.
 
You must log in or register to reply here.
Back
Top