oil cooler fittings

R

rx7chris

New member
Any one happen to know what size the banjo's are on the 2nd gen oil cooler, also the one on the rear of the motor, and lastly, is there an AN fitting for the front? Oooh, what size line should i run? -8? -10? gonna try and replace the lines so i can put the oil cooler in a better spot for air flow.

Thanks again


------------------
Chris
IT7 #88 **FOR SALE**
PowerTrip Racing
http://www.geocities.com/ptripracing/
 
Hi Chris, 7's only racing or sevensonly.com has them ready made or custom lenght for around $110-$125
their number is 661-764-5456. saves alot of hassle.

------------------
Daryl Brightwell
ITA RX7 #11
SFR, NORPAC
ITA RX7 #77
CSCC, SOPAC
E/P BOTH SOON
 
Racing Beat and Mazdatrix has the fitting in a -10 size. Comp might??? I bought the fittings from Racing Beat and then made my own hoses. Saved quite a bit.

Chris

------------------
Chris Ludwig
08 ITS RX7 CenDiv
 
Thanks Chris. I'm a little hesitant buying them premade, not sure how long i'm gonna need. Think i'll buy the fittings from RB and build my own, need 3 of the 16mm and 1 18mm. hope that's it, whole thing might cost $100, with all the line fttings. but then i can put it where i want.

Anyone ever use the blue "socketless hose and fittings, i've always worked with the steelbraided stuff, just wonder how it holds up in comparison.

Thanks again

------------------
Chris
IT7 #88 **FOR SALE**
PowerTrip Racing
http://www.geocities.com/ptripracing/
 
Chris,

The Aeroquip Socketless hose and the braided AQP hose have the exact same operating and burst pressure ratings. The braided outer covering is primarily for abrasion resistance. Unless the hoses are routed in a manner that expose them to debris, contact, or if they rub on something, the socketless stuff should work just fine.



------------------
Chris Wire
Team Wire Racing
ITS Mazda RX7 #35
[email protected]
 
If you use the socketless hose put a hose clamp on it for piece of mind. I tried socketless on my RX3 when I first got it and dumped oil all over the ground when I started it up on a cold morning. With the hose clamp I had no more problem.
 
You must log in or register to reply here.
Back
Top