Pulley questions

Chris Wire

New member
I'd like some opinions as to whether or not you guys feel that the oversize alternator pulley is a must-do? Trying to decide whether to spend the $65 or put it elsewhere.

Also, in the same vein, can anyone provide the appx length of the drive belt with and without the alternator pulley. I hate running back and forth to the parts store. :)

I already have the eccentric/water pump pulleys. Just looking to see what else may/may not be necessary.

Thanks for the help.
 
<strike>With the small eccentic pulley and the stock alternator pulley I use a 30.5" belt.</strike>

Oops, never mind, I see you are ITS so you're talking about a 2nd gen.
 
Yes on the over sized accesory pulleys & yes on the under sized on the e-shaft pulley. Bought them ALL from Mazda Motorsports.

***I already have the eccentric/water pump pulleys.***

Chris, what is an eccentric/water pump pulley?
 
***I already have the eccentric/water pump pulleys.***

Chris, what is an eccentric/water pump pulley? [/b]

David, you of all people should know this - Chris' water pump pulley is just a little different. :wacko:
 
I run the same setup. ITS RX-7 it too is a speedsource car.
My belt is a Goodyear 13311 M - 10AV0785

Hey Steve you in Asheville? I'm in Erwin TN just past Mars Hill...

Just got thiss Speedsource car maybe we hang at Carolina Motorsports or VIR Event...



Chadd Landress
CK~Evolution Racing
Speedsource RX-7 ITS
# 58
 
Yes on the over sized accesory pulleys & yes on the under sized on the e-shaft pulley. Bought them ALL from Mazda Motorsports.

***I already have the eccentric/water pump pulleys.***

Chris, what is an eccentric/water pump pulley?
[/b]

That's plural, Dave! Eccentric shaft AND water pump pulllleeeeeezzz!

Man this is a tough room!

Where's Fred?
 
***Eccentric shaft***

Duh, :023:

Is there a seniors race site any where. Better yet how about a seniors class for racing. We may have been through the wars of knowledge but the reflexes (brain) do fade a bit. ;)
 
Back
Top