Rotor Housings 13B

[tdw6974]

Are the rotor housings the same for the 86-90 13B Non turbo? Have 2 "parts engines" wondered what could be interchanged. Thanks T Weaver "In off season mode"

 

[mbuskuhl]

Here's a good rotor housing identification chart.

http://www.banzai-racing.com/faq_housings_ID.htm

They are interchangeable.

 

[C. Ludwig]

The S4 (86-88) and S5 (89-92) have the spark plugs located in different places. That's not indicated in the link above. Though I've never heard a good explanation on the reason for the change or if one is better than the other, it would be wise to not mix the two.

 

[tdw6974]

Thanks for Info. Have to get the magnifer out and take a look. One has the insert loose in the housing?? Damn heavy to roll around on garage floor. Anyboby come up with a cradle/stand to set engine on? T Weaver

 

[Weaver7]

There is a stand in the back of your garage....and they call me arrive and drive

 

[C. Ludwig]

Thanks for Info. Have to get the magnifer out and take a look. One has the insert loose in the housing?? Damn heavy to roll around on garage floor. Anyboby come up with a cradle/stand to set engine on? T Weaver

The exhaust inserts are held in by roll pins. They will come loose on occasion. When it comes to removing those pins the easiest method I have used is to build up a ball of weld with the MIG gun on the end of the pin. Clamp a pair of vise grips to the ball and pull the pin out.

Pineapple, Mazdatrix, and others sell an adapter plate for use with a traditional engine stand for the rotary. I've made my own from steel plate. All the adapters I have seen mount the engine front the AC/PS bracket studs on the front iron.