Eric,
I appreciate you speaking your mind. I'll speak to your points in order.
1) Actually, I have owned a few Sciroccos, and currently have 2 (76.5 and 81). And by all means, please list the factual errors that I've made. I certainly don't consider myself a Scirocco expert, which is one of the reasons that I started this thread here. I'm trying to get at how these cars really came. And while I may not have the level of personal experience that you have, I do respect the information that I get from people such as Dick Shine. Anyone that's been involved w/ VWs as long as we have, knows how bad their docs are, and how they mixed and matched parts. If there's evidence out there that disputes what's in ETKA and the other relevant docs, I'll be just as happy as Derek if it's found.
2) You're right, there is no mention of the close-ratio box in the Bentley manual, either for the GTI, or the Scirocco. But, there is a significant amount of documentation that shows the close-ratio box (actually, a couple) in the Rabbit GTI. That's anything from sales brochures, to the factory parts database (ETKA). I have yet to find similar documentation for the Scirocco. The old car was sold.
3) I apologize for labeling the 4K the "GTI gearbox". However, I believe it was Mark Coffin that first referred to it as such, (on the first page of the thread in the ARRC forum, Derek also refers to it as the 'gti box' in the next post). I certainly wasn't trying to be misleading, or confusing. And as far as the 9A goes, it was listed in both the Rabbit and Scirocco for the end of the model year (7/84) in ETKA. And why would't I 'accept' [sic] that the close-ratio box came w/ the 1.8 8v Sciroccos? There's plenty of documentation that supports it (sales literature, ETKA).
4) I wrote the letter to have ALL the 1.7 VWs (Rabbit, Scirocco II, and Jetta I) moved to ITC, because they stood no chance whatsoever in ITB. I wasn't trying to 'knock down' anything. I resent you implying that I was.
5) By 'build sheet', I mean the sticker that's on the inside, between the tail lights. It would look similar to this, and would indicate the engine and trans code, as well as the VIN #
***************************************
SORT. NR. 1014 ??-1-9680 422 UA
FAHRG. NR.
Chassis NO. WVWCAO53 ? DK034452
533 R44
MOTORKB / getr. kb
ENG CODE/ TRANS CODE JH 2H
LACKNR / INNENAUSST
PAINT NO/ INTERIOR [Y9V 92
M-AUSST / OPTIONS D04 D73 R82 002 027
425 465 651
*************************************
And while I know you can't determine the transmission from the VIN #, if you'll check the issues listed at the start of this thread, I was attempting to document an '84 car w/ a 1.7 engine. This is something you can tell from the VIN #, as it includes a year digit as well as an engine size digit. I never expected the VIN # to answer the transmission question. Sorry if you got that impression.
5) I'm not sure why you feel that a correction in specifications should be addressed through the protest process. The way I understand it, that's not what the protest process is for.
You talk about looking at the Scirocco owner's manual for engine break-in speeds, and the fact that the late '83 (83.5 to use your label) contained two sets of break-in speeds. Your conclusion is that that is an indication of two different transmissions. I don't dispute the fact that there were two different transmissions (as well as two different engines) available in the Sciroccos in '83. The ETKA documentation shows the 1.7 and the wide-ratio transmission, offered throughout the entire '83 m/y. It also shows the 1.8 and the close-ratio transmission offered from 1/83 (83.5?) to the end of the m/y (7/83). I think it's a bit of a stretch to say that the two different break-in speeds imply that a 1.7 came w/ a close-ratio transmission. Especially in light of the case that there appears to be no other documentation that supports this. To me, the much more logical conclusion is that:
higher engine break-in speed = car w/ 1.7 and wide-ratio box
lower engine break-in speed = car w/ 1.8 and close-ratio box