SE-R cup to expand w/ 240sx

N

nasa ser

New member
As the official/unofficial SE-R cup admin for NASA-MA, i have suggested making all ITA/ITS 240sx's eligible for SE-R cup.....this would increase the fields, also allow for chances at contingency money (include Nissan Motorsports who has put up $750 for the series champion).....I assume that generally the ITA 240s run similar times, the ITS ones i have seen have been close in times, a weight penalty for them may be neccessary. 240sx that have a sr20 motor (trubo) are alread allowed in SE-R cup extremet, so this would just make more cars eligible to run and the name would be changed to NISSAN CUP.....anyone interested?

ps. NISSAN-MA july 17th at summit should have at least 4 SE-R cup cars there, more if i can get some of the 240sx that run PS-2 to switch over.

Stephen Harper
2004 SE-R cup champion ;-)
 
I have looked at SRX in the future for my 240SX. I never really contemplated SE-R since the KA would be such a step away from the class - interesting idea.

However, in IT prep I was well over half second slower than you at VIR (asked Chris & Laura before VIR if you could run PS2 since we were both a 1 car class in registration). And you and the other SER were running 3 seconds faster than my IT prep level car at Shenandoah admitedly I had major problems throughout the weekend but still doubt I would have been keeping up. Prepping to be competitive in SE-R would prevent me from running ITA.

ITS S-14's are PS-1 but would at least be competitive in ITS form. Note that there are few who have brought them to ITS weights yet. Also putting a penalty on them wouldn't make sense if they are within the weight to power ratios in SE-R - if they meet it why would they be further penalized?

------------------
Ed.
240SX ITA

[This message has been edited by turboICE (edited June 30, 2005).]
 
I guess you can count me as moderately interested in the outcome of your endeavor but not ready to jump on board a nissan cup yet at least not in 2005.
 
He isn't on this board but be sure to ask Jeff in NASA-NE he runs a PS1 240SX and will likely be at hyperfest. Joe Lee the NE director can put you in touch with him.
 
Isn't the SER an ITA car now??

Seems like a good fit to me.

Ed, I suspect your times will drop, the 240 is a very fast car, and is the big dog in ITA.

------------------
Jake Gulick
CarriageHouse Motorsports
ITA 57 RX-7
New England Region
[email protected]
 
Originally posted by lateapex911:
Isn't the SER an ITA car now??

Seems like a good fit to me.

Ed, I suspect your times will drop, the 240 is a very fast car, and is the big dog in ITA.
Click to expand...
The SER is classed in ITA. However, the SE-R cup is a NASA "spec" class and allows modifications beyond the those permitted in IT.

Paraphrased:
1:16 power to weight

Any engine modification is allowed provided the car meets the class power to weight ratio rule

Wheel diameter is free

Composite hoods

Lights may be removed to duct air

Rear wing may be added

Upgraded front brake calipers and rotors

Lower suspsension ties allowed

No spherical bearings (???)

Motor mounts may be nonOEM

Flywheel can be lightened (I think)

Short shifters permitted

Trans gear surface treatments permitted

Stock final drive (???)

Vehicle wiring may be added, removed, re-routed, or in any way modified

Any battery may be fitted, and its location may be moved relative to stock
Click to expand...

Yes, eventually my times will improve I and my car both need work.


------------------
Ed.
240SX ITA
 
Interesting idea. I would be interested in hearing more, but I am a long way from Summit Point. Maybe I need to look into NASA a little more.

Or, it's just another avenue for selling my ITA 240sx. It's built, fast and ready for Nissan Cup!

BTW, anyone got a link handy for NASA-MA and the SE-R/Nissan Cup?

Jeremy

[This message has been edited by 7racing (edited July 01, 2005).]
 
a couple of points, shenandoah was new track for everyone, I'd be curious to see how you stack up at summit main,.....
2. as of right now, the SE-R cup cars are not running great ITA times at summit, eric (blue one) has run 1:29's, mine has only done 1:32's (when i was bone stock, it is faster now w/ cams (shenandoah was first race for it w/ cams)....as you improve your car, your times will drop....

also, I need to flush out rules for 240s, ITA or ITS, w/ some help from the boys in california as how to treat your cars, easiest rule is ITA legal cars are in as is, (that's what greg amy does and he can run hoosiers that way, currently under SER cup rules, we cannot run hoosiers (or kuhmo 710s) which slows us a little,

also I am not sure how much faster that ITS 240s are than us or than an ITA car, that's why i said they may or may not need a weight penatly (for example,. the infiniti G--20 can run SE-R cup but it gets a 100lb weight penalty after the 16:1 power to weight ration since it is a far superiod front suspension design, something like that may need to be done for ITS 240s, lastly, to be honest, a 240sx (ITA car prepped to Se-r cup specs) should smoke a front wheel drive 16:1 Se-R given power to weight being equal)

all issues we need to work out and can be worked on


Originally posted by turboICE:
I have looked at SRX in the future for my 240SX. I never really contemplated SE-R since the KA would be such a step away from the class - interesting idea.

However, in IT prep I was well over half second slower than you at VIR (asked Chris & Laura before VIR if you could run PS2 since we were both a 1 car class in registration). And you and the other SER were running 3 seconds faster than my IT prep level car at Shenandoah admitedly I had major problems throughout the weekend but still doubt I would have been keeping up. Prepping to be competitive in SE-R would prevent me from running ITA.

ITS S-14's are PS-1 but would at least be competitive in ITS form. Note that there are few who have brought them to ITS weights yet. Also putting a penalty on them wouldn't make sense if they are within the weight to power ratios in SE-R - if they meet it why would they be further penalized?
Click to expand...
 
see that's very close to what we should be running regularly, but aren't.....I think for this year I will open up SER cup to both ITA and ITS 240s, see who shows up and how fast they are and seek opinions for rules to balance them out....... (ie SCCA legal ITA and ITS cars can run, next year we may experiment w/ power to weight ratio rule like we use for SE-Rs


Originally posted by turboICE:
At MARRS 1 an ITA 240SX turned 1:29 on SP main. Latest I have is 1:34 on main.
Click to expand...
 
FWIW, I think allowing the ITS 240SX into SERC is not a good idea.

Granted, there aren't many super-fast ITS 240SX out there (yet?), but the ITS 240SX was left in ITS for a reason, because it's faster. The ITA 240SX? Fine. But the ITS one? I disagree.

Of course, I drive one SERC event per year, so...
 
Originally posted by GregAmy:
FWIW, I think allowing the ITS 240SX into SERC is not a good idea.

Granted, there aren't many super-fast ITS 240SX out there (yet?), but the ITS 240SX was left in ITS for a reason, because it's faster. The ITA 240SX? Fine. But the ITS one? I disagree.
Click to expand...

Are they really that different? I mean the chassis are exactly the same (suspension geometries, ect). The only difference is the motor, and just in the head. ITS weight for the car is already 120lbs over the ITA car. Do the DOHC motors make THAT much more HP over the SOHC ones?

So, that'd mean that the ITS 240's run 220lbs heavier than their ITA equivalent (if they add the 100lbs).

Personally, even with the penalty, I'd like to run in the class. If there's more turnout, that's great (PS1 gets kinda small). And several times, at VIR (in Feb) and when I last ran Mid Ohio, I was playing with those SE-R's for a good portion of the racing.

Just my $.02.

joe
 
i think the rules will have to be adjusted for the ITS at some point, but for this years, at least here on the East Coast, we are going to try it with both ITA and ITS,I will post a link of the proposed rules as written by jim (west coat) once he gets it done

Originally posted by jamsilvia:
Are they really that different? I mean the chassis are exactly the same (suspension geometries, ect). The only difference is the motor, and just in the head. ITS weight for the car is already 120lbs over the ITA car. Do the DOHC motors make THAT much more HP over the SOHC ones?

So, that'd mean that the ITS 240's run 220lbs heavier than their ITA equivalent (if they add the 100lbs).

Personally, even with the penalty, I'd like to run in the class. If there's more turnout, that's great (PS1 gets kinda small). And several times, at VIR (in Feb) and when I last ran Mid Ohio, I was playing with those SE-R's for a good portion of the racing.

Just my $.02.

joe
Click to expand...

[This message has been edited by nasa ser (edited July 07, 2005).]

[This message has been edited by nasa ser (edited July 07, 2005).]
 
I'd be very interested, I'm the Jeff Ed mentioned earlier. The PS1 class is very small, I'd love to see some add'l in class competition.
 
well no reason Jeff , if you want, can't just change to SER-CUp now for hypefest, currently we have 3 cars signed up, and hopefully one more SE-R, with you we'd have 5 cars inclass which is fairly respectable ;-)
 
Jeff isn't a real forum rat, so if you get to Tuesday and he hasn't responded see if Chris or Laura can put you in contact with him.
 
You must log in or register to reply here.
Back
Top