side impact beams

D

DURELL

New member
are they worth removeing. i am in the process of building to what i hope to some day be an "IT" racer....but for the time being autocross and time trial car is what it'll be....i have pretty much everything out but the door beams......should i remove them.....the rabbit is going to have a full cage.......thanks

------------------
i can see IT in my future.
 
Chris,

The beams have to stay, and you can only gut the driver's door if you put NASCAR bars in. Also, you've got to run a stock 1.6 8v in ITC, and a stock 1.8 8v in ITB. You really need to get a copy of the GCR.



------------------
MARRS #25 ITB Rabbit GTI
 
Thanks bill, i'll leave'um in...wear can i get a copy of the "GCR"?....I was planning on running a proportion valve for the rear brakes....i really have a bunch of questions on the preperation.. and "legalization"of the 'modifications"....

------------------
Chris Durand, QSCC
 
i just red the other topic on the 86IT racer and some had mentioned a bolt in cage. I was thinking that they would not be legal!!.....Man i really have a bunch of prep questions....

------------------
Chris Durand, QSCC
 
Chris,

You can get a copy of the CGR from the SCCA office in Denver. However, I would try and borrow someone's 2001 book as the 2002 book will be out in a couple of months.

Email me off-line if you want to talk about preparing your car.


------------------
MARRS #25 ITB Rabbit GTI
 
You must log in or register to reply here.
Back
Top