STRAW POLL - Wheel diameters

Banzai240

New member
I'm just curious, and the other poll is too sidetracked and not specific, so let's try this...


PLEASE, A simple YES or NO answer will suffice. The question is pretty simple. If you have any feedback or changes you'd want, please e-mail them to me and I'll compile them.

My E-Mail is: [email protected]


Would you support the following rule change:


ALL IT cars currently classified with only 13" wheels are allowed a +1/+2" wheel diameter upgrade.

All remaining IT cars are allowed a +1" upgrade over their currently allowed wheel diameter.

Rim width allowance remains the same.


------------------
Darin E. Jordan
SCCA #273080, OR/NW Regions
Auburn, WA
ITS '97 240SX
DJ_AV1.jpg



[This message has been edited by Banzai240 (edited January 14, 2004).]
 
Yes.

EDIT - Note that it's extremely unlikely that I would take advantage of this with my current car as well.

[This message has been edited by Knestis (edited January 15, 2004).]
 
Yes, I would "support" it, as in not oppose it.

However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.
 
Yes, w/ the caveat that max wheel size is limited to 17". (was gonna say 16", but I'll be flexible on this one).

------------------
MARRS #25 ITB Rabbit GTI (sold) | MARRS #25 HProd Rabbit
SCCA 279608
 
YES

------------------
Grandpa's toys-modded suspensions and a few other tweaks
'89 CRX Si-SCCA ITA #99
'99 Prelude=a sweet song
'03 Dodge Dakota Club Cab V8-Patriot Blue gonna tow
 
Yes. Wrote comp board.

------------------
Wayne Briggs
CenDiv
ITA Capri
Building a SM
Move...Lest Ye Rust!
 
Originally posted by grega:
Yes, I would "support" it, as in not oppose it.

However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.


ditto....this is a Band-Aid on Bigger issues.
 
Back
Top