15" wheels in ITB

Rim details

Below is my order:
The rims are still available... and they are avaible for the same price as last year. $297 each.

They are SSR's Type C
15" x 6"
4x100 bolt patern
Offset is ET 38mm (A wheels offset is the distance from the centre of the wheel to the face of the bolting plate.)
9 lbs each
You will need to purchase hubcentric spacers which TireRack does not sell. You should also have converted over to wheel studs and lug nugs instead of the factory lug bolts.



Order Number: 4723347 Order Date: 09/14/07 Via: UPS GROUND From: Delaware
Qty
Size and Description
Availability
Price Each
Total Price
4 Required centering ringIn StockN/CN/C
4 Ssr type c/c-rs pcd 100 cap +In StockN/CN/C
20 Required lugbolt for vehicleIn StockN/CN/C
4 Retaining clip for al-p ring +In StockN/CN/C
4 15x6 SSR Type C AnthraciteIn Stock $297.00 $1,188.00




Some products above selected for the following vehicle(s):
Vehicle: 97 Volkswagen Golf GTi VR6
Vehicle: 98 Acura Integra GS

Shipping:$27.14
Tax:$.00
Excise Tax:$.00
State Disposal Fund Fee:$.00
Order Total Including Shipping:$1,215.14
 
Last edited:
Other options

I guess you can just look at what 15"x6" rims that are available with the 4x100 bolt pattern.... Then look for an offset between 20 & 38mm. I would not go more than 38 beacuse you end up with too large a spacer. Less than 20 could cause clearance problems.
My setup works well but the rims are on the expensive side.

Here is more detail regarding the rim then you probably need:
WHEEL SPECIFICATION SCREEN
INQUIRY CODE
Item Description
C5638BA 15X6 4-100 ET38 SSR TYPE C
FULL ANTHRACITE PAINT(CB 72.2)
Vendor Part #.... C5638BA 72.2 Wheel Offset.. ET 38 MM BS 4.92 in
Vendor Whl Model. SSR TYPE-C Actual Whl Wgt. 8.8 Lbs 4.00 Kilos
Part # On Wheel.. TYP-C/4H100/15X16+38 Wheel Lip Size. 33.5 X-factor
Part # Location.. STICKER Cap Attachment. SNAP-IN COMPCAPLG
Country Of Origin JP Logo Diameter.. 60mm
Japan Wheel Finish... Anthracite Painted
Importer......... The Tire Rack Finish Process. Anthracite w/Clear
Contact Phone.... 8004450179 S Dial Finish Warranty 1 Year
Certifications... JWL, SAE, VIA Finish Testing.
Construction Type 1pc. Semi-Solid Forged
Material Alloy... A357 MHD/A6061-T6 Ring Fixed Bore 72.2mm RING SYSTEM
Structural Wrnty. None Lug Seat Type.. 60° Opening 27.6
Heat Treated..... Yes (T6) Bolt Extension. 20.6mm B12 (B21 Ref.)
Load Rating...... 1521 Lbs 691.4 Kilo Flange Type.... FULL WITH VOIDS
Tested Tire Dia.. Inches Flange Diameter 140mm
# Of Cycles Rad.. Lat Pressure Sensor All Systems OK
Mounting System.. Standard Mount Valve Hole Size 11.3mm
 
Last edited:
They are less than 9lb. Nice wheels. Similar to the price it would take to get that weight in a 13" wheel - see Catch22's honda for reference.
 
Beran said:
You will need to purchase hubcentric spacers which TireRack does not sell.
Click to expand...

Thanks for all the info Beran! You have any good vendors for alluminum hubcentric rings? I purchases some though Jegs awhile back and they were still a little off. They only offered 2 sizes around the VW fitment and the right size was in between. I had to machine the closer fitting set a little to fit and they only come in plastic. PITA!
 
You must log in or register to reply here.
Back
Top